HP Series
EMI / RFI Filters
High Performance General Application Line Filter
Specifications
| Voltage rating: | 115/250 VAC |
|---|---|
| Line frequency: | 50/60 Hz |
| Leakage current (line to ground):* | 0.50 mA maximum at 115 V, 60 Hz 1.00 mA maximum at 250 V, 50 Hz |
| Test Voltage: | Line to ground, 2250 VDC Line to line, 1450 VDC |
* Low leakage current models (<0.5mA@250VAC / 50Hz) may be ordered by adding the prefix “L”, e.g. LHP1-1. These units offer 6dB lower insertion loss.
Applications
The high-performance filters provide high attenuation for low impedance loads, such as motors and switching power supplies. They are intended for use in severe EMI environments. These filters are designed to help meet the new IEC requirements where conducted emissions from the equipment to the power line must be further suppressed.
Certifications
UL File No. E62459 (All Models), CSA File No. LR56661 (All Models), TUV File # R72170757 (All models except 20 & 30 Amp models).
Electrical Schematics
How To Define A Part Number
| Series | Case Style | - | Current Rating |
|---|---|---|---|
| HP | 1 | - | 1 |
*To designate metric mounting, add the suffix “M” before the “-”, eg: HP7M-10
**HP1-20 uses style 5 Mounting with fast-on terminals
Performance
| Current Rating | Frequency (MHz) | ||||||
|---|---|---|---|---|---|---|---|
| Common Mode | 0.15 | 0.5 | 1 | 5 | 10 | 20 | 30 |
| 1A | 30 | 65 | 65 | 65 | 65 | 65 | 65 (db) |
| 2A | 30 | 65 | 65 | 65 | 65 | 65 | 65 (db) |
| 3A | 30 | 65 | 65 | 65 | 65 | 65 | 65 (db) |
| 5A | 30 | 65 | 65 | 65 | 65 | 65 | 65 (db) |
| 10A | 20 | 44 | 60 | 65 | 65 | 60 | 60 (db) |
| 20A | 10 | 44 | 55 | 65 | 65 | 60 | 55 (db) |
| 30A | 8 | 44 | 55 | 65 | 65 | 60 | 55 (db) |
| Differential Mode | |||||||
| 1A | 9 | 30 | 65 | 60 | 55 | 50 | 45 (db) |
| 2A | 9 | 30 | 65 | 60 | 55 | 50 | 45 (db) |
| 3A | 9 | 30 | 65 | 60 | 55 | 50 | 45 (db) |
| 5A | 9 | 30 | 65 | 60 | 55 | 50 | 45 (db) |
| 10A | 9 | 10 | 35 | 60 | 55 | 50 | 45 (db) |
| 20A | 9 | 10 | 35 | 60 | 55 | 50 | 45 (db) |
| 30A | 9 | 10 | 35 | 60 | 55 | 50 | 45 (db) |
Minimum Insertion loss in 50 ohm system per MIL-STD-220A.
Ordering Information
Circuit A Products
| Current Rating | Part Number | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|
| Circuit A | A | B | C | D | E | |
| 1A | HP1-1 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 |
| HP2-1 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 | |
| HP3-1 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 | |
| 2A | HP1-2 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 |
| HP2-2 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 | |
| HP3-2 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 | |
| 3A | HP1-3 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 |
| HP2-3 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 | |
| HP3-3 | 50.80 | 44.45 | 28.70 | 60.45 | 69.85 | |
| HP1-3L | 63.50 | 50.80 | 28.70 | 74.68 | 84.32 | |
| HP2-3L | 63.50 | 50.80 | 28.70 | 74.68 | 84.32 | |
| HP3-3L | 63.50 | 50.80 | 28.70 | 74.68 | 84.32 | |
| HP7-3* | 63.50 | 50.80 | 31.75 | 40.00 | 16.00 | |
| HP8-3* | 63.50 | 50.80 | 31.75 | 40.00 | 16.00 | |
| 5A | HP1-5 | 63.50 | 50.80 | 28.70 | 60.45 | 84.32 |
| HP2-5 | 63.50 | 50.80 | 28.70 | 74.68 | 84.32 | |
| HP3-5 | 63.50 | 50.80 | 28.70 | 74.68 | 84.32 | |
| HP7-5* | 63.50 | 50.80 | 31.75 | 40.00 | 16.00 | |
| HP8-5* | 63.50 | 50.80 | 31.75 | 40.00 | 16.00 | |
| 10A | HP1-10 | 63.50 | 50.80 | 38.10 | 60.45 | 84.32 |
| HP2-10 | 63.50 | 50.80 | 38.10 | 74.68 | 84.32 | |
| HP3-10 | 63.50 | 50.80 | 38.10 | 74.68 | 84.32 | |
| HP4-10 | 63.50 | 50.80 | 38.10 | 74.68 | 84.32 | |
| HP7-10* | 82.55 | 50.80 | 38.10 | 40.00 | 16.00 | |
| HP8-10* | 82.55 | 50.80 | 38.10 | 40.00 | 16.00 | |
| 20A | HP1-20** | 98.55 | 84.07 | 38.10 | 95.25 | 104.65 |
| HP5-20 | 98.55 | 84.07 | 38.10 | 95.25 | 104.65 | |
| 30A | HP6-30 | 133.35 | 76.20 | 76.20 | 143.00 | 152.15 |
0.250 Tab Terminals extend 14.73mm. 18-Gauge wire leades extend 107.95mm. 8-32 x 0.675 threaded Terminals extend 26.5mm maximum Mounting Hole Diameters are 4.78
Case Styles
Style 1
Style 2
Style 3
Style 4
Style 5
Style 6
Style 7 / 7M
Style 8 / 8M
Panel Cut-Out
Specifications subject to change.