PM1 Series
EMI / RFI Filters
IEC-320 C14 Power Entry Module
1-6 Amp EMI Line Filters
Specifications
| Voltage rating: | 115/250 VAC |
| Line frequency: | 50/60 Hz |
| Leakage current (line to ground): | 0.25 mA maximum at 115 V, 60 Hz 0.50 mA maximum at 250 V, 50 Hz |
| Test Voltage: | Line to ground, 2250 VDC Line to line, 1450 VDC |
Applications
SAE Power’s power entry module EMI filters provide the convenience of single-point, snap-in mounting of an IEC connector, a fuse holder with optional power ON/OFF switch and voltage selector switch plus an EMI filter. The fuse holder is designed for one IEC 5x 20mm fuse and one spare. For dual fuse, consult factory.
Certifications
UL File No. E62459, CSA File No. LR56661, TUV File No. R72070222.
Electrical Schematics
Figure A
Figure B
Figure C
Performance
| Current Rating | Type | Frequency (MHz) | ||||||
|---|---|---|---|---|---|---|---|---|
| Common Mode | 0.10 | 0.15 | 0.5 | 1 | 5 | 10 | 30 | |
| All | 20 | 24 | 30 | 35 | 45 | 50 | 45 (db) | |
| Differential Mode | ||||||||
| All | 8 | 10 | 30 | 45 | 45 | 45 | 40 (db) | |
Minimum Insertion loss in 50 ohm system per MIL-STD-220A.
Ordering Information
| Part Number | Rated Current | Rated Current | Power Switch | Voltage Selector | Schematic |
|---|---|---|---|---|---|
| 115 VAC Operation | 250 VAC Operation | ||||
| PM1A6 | 6A | 6A | - | - | A |
| PM1B6 | 6A | 6A | Single Pole1 | - | A |
| PM1C6 | 6A | 4A | Dual Pole2 | - | B |
| PM1D6 | 6A | 5A | Single Pole1 | Rear3 | A |
| PM1E6 | 6A | 4A | Dual Pole2 | Rear3 | B |
| PM1F6 | 6A | 5A | - | Rear3 | A |
| PM1G6 | 6A | 6A | - | Front4 | C |
Notes:
1. Single Pole Switch is UL & CSA Approved for 6 Amps @ 125 VAC / 250 VAC, VDE Approved for 6 Amps @ 250 VAC. Max inrush current of 24 Amps.
2. Dual Pole Switch is UL & CSA Approved for 6 Amps @ 125 VAC / 4 Amps @ 250 VAC, VDE Approved for 4 Amps @ 250 VAC. Max inrush current of 51 Amps.
3. Voltage Selector is UL, CSA & VDE Approved for 10 Amps @ 125 VAC and 5 Amps @ 250 VAC.
4. Voltage Selector is UL & CSA Approved for 6 Amps @ 125 VAC / 250 VAC, VDE Approved for 6 Amps @ 250 VAC.
Case Styles
PM1A6
PM1B6 / PM1C6 (switch marking reversed)
PM1D6
PM1G6
PANEL CUT-OUT
Specifications subject to change.